Re: Re: Re: Re: IHC 300 carburetor leaks

Posted by ChadS on January 06, 2004 at 07:05:42 from (66.228.96.156):

In Reply to: Re: Re: Re: IHC 300 carburetor leaks posted by Jerry on January 05, 2004 at 16:59:27:

Possible,, the gasket may not be sealing around the venturi, Look at the float,, make sure that it is not rubbing the carb bowl,, and it is proper adjustment. Most of the ime, the float has got bent,, and is fillingthe bowl too full, The float should not hang down excessivly,, just enough to operate the needle, I can rebuild the carb completly for $125.00+shipping. I have kits in stock,, So check the float, the needle, all of the seals, and check the fuel bowl for warpage. If all of those are in check,, it should not leak. My email address is [email protected]. if you would like to get ahold of me. ChadS

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Re: IHC 300 carburetor leaks Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]