Re: Motor Mounts for a 41' H ?

Posted by Brad L on January 01, 2004 at 18:42:50 from (63.226.132.18):

In Reply to: Motor Mounts for a 41' H ? posted by GM on January 01, 2004 at 18:09:07:

1939 thru I think mid 1941 had rubber mounts Farmall replaced them with a kit which included solid mounts and different frame rails. The reason I was told is the problem my 40 H has, the mounts drooped and let the front of the engine sag.Mine is down enough where the crank won't line up any more. I had Case/Ih look up motor mounts and they are no longer avalible. I believe I read here somewhere that you can take the old ones out and burn/cut the rubber out and weld a solid spacer in place of the rubber and then reinstall. I plan to try that this spring when I can take my bucket off. If I am wrong about this I am sure someone else will have a different idea.Brad

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Motor Mounts for a 41' H ? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]