Re: Decision with SMD?

Posted by deereeater on December 26, 2003 at 15:24:23 from (65.119.218.100):

In Reply to: Decision with SMD? posted by 49 Cubber! on December 26, 2003 at 14:34:46:

go onto batescorp.com and check there prices for new pistons and rings. if the cylinders are scored then the pistons are no good either you would save yourself the time and trouble of ripping the engine down twice. send the pump and injectors to a injection shop and have them tested or a diesel repair facility. it would only cost a hundred or so to test the pump. I turned down a md because of the pump but don't let it scare you when you get it running it is worth it. my smd sat for 25 years and runs like it was brand new and I even havent adjusted the valves yet. good luck that tractor is worth every penny when done.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Decision with SMD? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]