Re: How do you change the fan belt on an H ??

Posted by john d on December 24, 2003 at 12:52:41 from (64.12.97.12):

In Reply to: How do you change the fan belt on an H ?? posted by Santa , Merry X-mas on December 24, 2003 at 10:51:57:

Santa, you've gotten excellent advice from little john and Bill Smith. I would add that PATIENCE is the most important part of this procedure, because that old belt may have been on there for 30 years or more, and those parts likely haven't been moved in quite a while. If you can allow yourself the time, turn that setscrew hole up on top, and pour some solvent in there, then let it set for a day or so. Work the front sheave of that pulley back and forth, and soon you'll have it turning. The threads are likely full of dust and corrosion, so take your time. I got one loose on my M last winter that hadn't been moved in at least 25 years. I used most of a can of spray Gumout, and most of a can of PB Blaster before I was finished.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: How do you change the fan belt on an H ?? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]