|
Farmall & IHC Tractors Discussion Board |
560 gas question
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by skip on December 21, 2003 at 18:33:37 from (152.163.252.227):
Worked on getting a 560 fired up this weekend, and temporarily succeeded but had to use ether through the carb.
My questions are, (since Ive never worked on one before)
1. Can you use regular unleaded pump gas ,or do you need to add a lead substitue so not to burn the valves.
2. Is the 560 carb hard to repair? Gas just poured out so the float is probably stuck or gummed up.
3. Has anyone converted to electronic ignition, or are points/condenser just as good.
4. Oil pressure guage didnt come up either so Im glad it didnt run long. Will have to check it out.
5. Anyone have a steering wheel thats not too rusted up and want to sell it?
Thanks for your help.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Tractor Traction - by Chris Pratt. Our first bout with traction problems came when cultivatin with our Massey-Harris Pony. Up till then, this tractor had been running a corn grinder and pulling a trailer. It had new unfilled rear tires and no wheel weights. The garden was already sprouting when we hooked up the mid-mount shovel cultivators to the Pony. The seed bed was soft enough that the rear end would spin and slowly work its way to the downhill side of the gardens slight incline. From this, we learned our lesson sinc
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
