Re: Re: Rear Blade on M

Posted by Bowlegs on December 18, 2003 at 09:42:37 from (198.26.120.13):

In Reply to: Re: Rear Blade on M posted by Kelly C on December 18, 2003 at 07:31:08:

Kelly we mounted 2 u brackets on the old H we had and used 2 long arms connected to the 5ft mower. Bolted a piece of 3x3 angle to the top of the rearend and used a cylinder to raise the brushhog. Had to add a piece of chain and hook it to the hog so the cyl would reach. leave the chain a lil slack and the blade would go up and down with the ground also used the same set up with a box blade and it worked well.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Rear Blade on M Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]