|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Farmall C Rear wheel issue!
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Haas on December 18, 2003 at 05:26:04 from (12.65.7.55):
In Reply to: Re: Re: Re: Re: Farmall C Rear wheel issue! posted by Tommy H on December 17, 2003 at 19:18:45:
Welcome to old tractors. Start to fix one thing and find other things that need fixing. Pretty soon, you have the whole thing apart. As to your rim, weld a patch in the hole and drill a new hole for the stem. The C has a flat spot on the rim where the stem hole is, so if you can best to patch and redrill at same location. That is what I did, although I think it would work to redrill in another location. You won't know for sure what you have to do until you have the tire off. You can get a new rim from several suppliers (and likely IH as well). From aftermarket people, probably around $200. IH will be higher.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Engine Basics: Spark Plug Cleaning - by Staff. Cleaning procedures: Brush or blow dirt from around the spark plug base. Remove the plug with a correctly fitted wrench. Examine the porcelain insulator and points. If the insulator appears to be melted or blistered, cracked or broken, and the points seem unduly burned it is evident that the plug is operating too hot and it should be replaced with a colder plug. If the plug is fouled excessively with carbon it apparently is operating too cold and it should be replac
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|