Re: Re: Touch Control Leak on Farmall C

Posted by Haas on December 18, 2003 at 05:15:33 from (12.65.7.55):

In Reply to: Re: Touch Control Leak on Farmall C posted by FC on December 17, 2003 at 07:32:40:

You may also need gaskets for where the pump manifold connects to the Touch Control unit and for the filter screen. I was able to sucessfully reuse the filter screen gasket, but needed the one for the manifold. Also forgot to mention that in order to get the control valves out, you have to remove the big bolts that hold the rockshaft arms and push the rockshaft assembly out of the way to get the control valves to come out. It probably be a good idea to pull the pistons out of the cylinders and put new boots and O rings there too. I did not do that, as I had not ordered the parts and there was no sign of a leak. My unit still had the original leather boots on it.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Touch Control Leak on Farmall C Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]