Re: Re: Well I better do the TA.

Posted by Chad on December 11, 2003 at 07:24:53 from (206.230.0.170):

In Reply to: Re: Well I better do the TA. posted by John A. on December 10, 2003 at 20:02:01:

John,
I have something very similar happening to our 1086 that you just described on your 966. My question is whether this clunk happens in both Hi and Lo TA positions. We never use Lo so I didn't know if the TA was the cause of the noise in the 1086 since the TA isn't engaged. However, this clunk or slap occurs just as you described. If the tractor is coasting and I depress the clutch, the sound doesn't occur. However, if it is under load and it is clutched, the nasty clunk is heard along with a corresponding jerk in the driveline.

If it it the TA, does it require a complete replacement or can it be fixed?

Thanks,
Chad

Follow Ups:

• Re: Re: Re: Well I better do the TA. John A. 17:58:45 12/12/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Well I better do the TA. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]