Re: Rear main seal on IH 1066

Posted by the tractor vet on December 06, 2003 at 20:07:32 from (216.196.13.150):

In Reply to: Rear main seal on IH 1066 posted by Vern on December 06, 2003 at 19:27:00:

I have done it with out the tool but it is hard to do with out messen up the seal . So i went and bought the spec.tool and it made life much easier. If the seal is hard then it is the seal that is the problem but if the seal is soft then i would be looken at the main bearings and a new seal . The tool bolts to the crankshaft and acts like a press and installs the seal and ware ring all at once and sets the depth of the seal and ware ring.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Rear main seal on IH 1066 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]