|
Farmall & IHC Tractors Discussion Board |
Re: 6 volt cub
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steve - IN on December 06, 2003 at 18:21:01 from (12.222.30.13):
In Reply to: 6 volt cub posted by jeff b on December 06, 2003 at 17:54:02:
jeff, I've got a 6 volt H which turns over easily when it's 0 outside. I also have a good battery and starter, and an H has more to turn than a Cub. The difference is I installed new 00 gauge welding cable, new connectors and grounded the battery directly to a bare metal base I formed on the starter mount. If you try the big cable route first, it might make a world of difference, and you could save some bucks compared to the new regulator, light bulbs, dropping resistor required for a 12 volt conversion. If not, you can still use those big cables with 12 volts. Another thought is that a 12 volt system won't do any better if your charging system isn't working well. Have you check the battey to see if it's getting a good, consistent charge? Another note is that it helps to switch to 10w-30 or 20w-40 in the winter instead of leaving the summertime 30 or 40 weight in the crankcase.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
A Tinker�s Guide to Manifold Repairs - by Curtis Von Fange. A common characteristic of keeping older equipment is that some parts to make repairs can be extremely difficult to locate. For example, finding a replacement for a cracked intake or exhaust manifold on a unique tractor or odd brand can be a frustrating and downright impossible mission. So, what is an alternative solution to scraping out that �one of a kind� piece of history? First, decide if you are one to try a repair yourself or have someone else do it. If you are uncomfortable about
... [Read Article]
Latest Ad:
2555 Mahindra Shuttle 4x4 heat,air,diesel,7ft Mahindra heavy duty bushhog 7ft snowblade bucket
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|