Re: lookn for a good model tractor to bale hay wit

Posted by BigRed on December 05, 2003 at 09:08:06 from (216.159.155.116):

In Reply to: lookn for a good model tractor to bale hay with posted by Aaron Smith on December 04, 2003 at 22:04:29:

I'm not sure whether you are talking about small square bales or round bales, I assume you are talking about the small bales. We've used a 504, and 666 gas on our MF 10 baler. 666 works great. Could pull a wagon with 250+ bales on it, and this in in some pretty steep hills. Also worked great on a Vermeer C round baler. We also use a NH 9' haybine. 666 works great, and they are fairly reasonable. Just traded ours in for a combine, and I think they are asking around 5 grand for it. The paint was bad, but the tin was straight. We recently started using a 756 diesel on the baler, and found it an advantage because of more gears. Didn't need the extra size or power, but the gears make a lot less use of the clutch. It all depends on whatelse you plan on using the tractor for, and personal preferance.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: lookn for a good model tractor to bale hay wit Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]