Re: 460-H farmall engine swap

Posted by ChadS on December 02, 2003 at 06:19:05 from (66.228.96.243):

In Reply to: 460-H farmall engine swap posted by ChadS on December 01, 2003 at 10:44:57:

Here is what my plan is ,, it is for light wieght pulling,, under 4500 lbs, and 12mph,, I am not going all out this time with the engine,, don't want to break it right off the bat HA HA,, here is a few things I found last night,, The 350-early460 had the same clutch and pressure plate,, I think I will either remachine the H flywheel to fit the 6 cyl,, or build a steel one, The back plate on the engine will be about the same as the H,, but I may make it a bit thicker,, I still want to use the original starter on it,, so that would be the hardest part of this swap,, I got the engine out of the combine late last night,, gonna tear the back of it down to make the plates and engine frame mounts later this week, Trust me,, iwill keep all of ya updated,, Maybe this could be the next big thing!! HA HA,, Thank you all for the wisom you all have given me,, Keep it coming!! Any info is great!!!!!!! ChadS

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 460-H farmall engine swap Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]