Re: Hey guys...Remember me?

Posted by rustyfarmall on November 26, 2003 at 15:10:43 from (207.32.13.199):

In Reply to: Hey guys...Remember me? posted by Salmoneye on November 26, 2003 at 12:03:19:

I have seen that very same thing happen, and with an H Farmall, although not quite as severely as yours, it still had to have the clutch housing replaced. The first thing I would suggest would be to find a different loader, that one in the picture looks like it puts the stress all in the wrong places, although the H that we had break in two was equipped with a McCormick #31 loader, so maybe it doesn't make any difference. We braced ours up by running a heavy shaft through the holes in the bottom of the belly pump, connected by a pair of heavy duty turn buckles up to the frame rails. I don't know if this helped or not, but we never broke it again. Of course we were much more carefull after that.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Hey guys...Remember me? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]