Re: Putting a snow blade on a IH H tractor

Posted by john d on November 22, 2003 at 10:32:32 from (64.12.97.12):

In Reply to: Putting a snow blade on a IH H tractor posted by JR on November 21, 2003 at 11:09:57:

The easiest way is if your tractor has a loader. Take off the bucket, and put a blade on the front of the arms. You can be as creative as you want, or keep it really simple. If you have loader arms on your H, you could easily adapt a rear-mount 3pt blade onto the front end.

I have a flat blade that's 8' wide and over 40" tall that goes on the front of my M. An H will not push what an M will, but it may surprise you. Chains are a big help, but not essential unless there is ice under the snow. Add weight to the back of your tractor. Set the blade about 2" off the ground, put the H in 3rd gear, and move some snow!

• Moving snow

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Putting a snow blade on a IH H tractor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]