Re: Extracting injectors on a 666

Posted by Ty on November 20, 2003 at 04:51:28 from (69.21.122.84):

In Reply to: Extracting injectors on a 666 posted by Wayne M Kittler on November 19, 2003 at 21:12:56:

I always clean around them really good even a little pent. oil. Them take the hold downs off and work the loose w/ a crescent wrench or vice grip and the lift them out sometimes had to use a thin wonder bar to pry up. If they were bad I just traded them for reman inj. They were around 45 a piece but this was on a 1086. My 10 cents worth.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Extracting injectors on a 666 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]