Re: Proper adjusting of tie rods on IH wide front

Posted by scotty on November 17, 2003 at 06:26:08 from (199.231.49.128):

In Reply to: Proper adjusting of tie rods on IH wide front posted by GP on November 17, 2003 at 05:26:15:

Allan,
I dont own a 666 but procedure should be the same on all wide fronts. With tractor on level ground and wheels pointed straight, measure to center line height of tire. With white chaulk or other suitable marker mark both the front and back of both tires at the center line. I use a tape measure to measure from the center rib to the same spot on the opposite tire. Then go to the back side and take that measurement and adjust tierod ends accordingly, approximately 1/8" toe in so tractor tracks properly and this also prevents the frontend from wandering. Hope this helps.

scotty

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Proper adjusting of tie rods on IH wide front Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]