Re: Super AV still stuck

Posted by Bill Ramsey on November 15, 2003 at 07:12:47 from (204.96.221.206):

In Reply to: Super AV still stuck posted by Tom on November 13, 2003 at 19:19:51:

Tom
I have freed up three engines that were stuck pretty bad in the last month. After using PB in the cyl. I had a buddy get under tractor with a pry bar on the fly wheel and using 12 volt batt. bumped starter and pryed at same time. If it will move slightly then reverse direction with pry bar. Back and forth and soon had the starter roll it all the way over. If that don't work remove head and use block of hard wood and hamer on each piston. LOL Bill

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Super AV still stuck Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]