Re: M hydraulic problem and year id

Posted by Haas on November 14, 2003 at 05:41:43 from (12.65.13.61):

In Reply to: M hydraulic problem and year id posted by Phil on November 14, 2003 at 05:19:40:

You can determine the year from the casting codes. All the larger castings have a date code on them. It will be for example 6-22-R. The R stands for 1948. Sometimes the year number is used instead of the letter. The letters start at A for 1931 and go to T in 1950. In 1951 both U and W were used and 1953 and 54 are Y and Z. This is not an exact method, as sometimes castings were stored up and used later and also they can be changed, but this should get you at least the approximate year.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: M hydraulic problem and year id Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]