Re: super M wiring help for novice

Posted by Will Sick on October 22, 2003 at 23:08:30 from (199.120.121.27):

In Reply to: super M wiring help for novice posted by bob murphy on October 22, 2003 at 11:08:47:

Someone may have wired this tractor so that when the starter is engaged it send 12 volts to the coil to aid in starting and then the distributor get its current thru a resistor to cut it back to 6 volts thru the ignition switch. This is why it runs when cranking the starter. Run a jumper wire from the battery to the coil to see if it will keep runing then. You could also use a test light to see if the coil is getting current when the switch is on.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: super M wiring help for novice Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]