Re: charn-lynn power steering

Posted by Bob M on October 20, 2003 at 12:17:39 from (165.170.128.65):

In Reply to: charn-lynn power steering posted by Delbert on October 20, 2003 at 11:53:59:

You certain the oil's leaking out of the shaft seal and not coming from the hose manifold? The one on my SM leaked terribly when I got the tractor. Turned out the hose manifold had loosened up and one of the O-ring seals was partially blown out. Replaced the O-rings (found matching rings for $.10 apiece at Home Depot) and tightened the manifold back down - it hasn't leaked a drop since.

I understand there is a complete gasket and seal kid available for the Charlynn steering motor - Bates Corp stocks them. However I've never had one of these apart. I do know however you need to be careful taking it apart, and to put it back together with the parts oriented EXACTLY as before. Otherwise the PS won't work right when you are done.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: charn-lynn power steering Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]