400 mis-firing

Posted by badpenny on October 13, 2003 at 15:21:01 from (66.222.121.225):

Went to start my 400 this am, put battery in, fired right up. Then it started missing on one cylinder. There was a little moisture out of the exhaust(maybe a teaspoon full). This tractor has been sitting for almost 8 months as it is my snowplow tractor. I have put new rotor/cap/plugs/ wires/condenser on, no change. Pulling #2 plug wire does not change engine sound so my best guess is something wrong with #2, my question is can any one give me some advice on what to look for next? Thanks in advance badpenny

Follow Ups:

• Re: 400 mis-firing Mr. J 19:29:56 10/13/03 (0)
• Re: 400 mis-firing Charlie 15:32:45 10/13/03 (0)

Post A Followup Name: E-Mail: Subject: Re: 400 mis-firing Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]