Re: Super C stopped moving!!

Posted by DaveK(IN) on October 04, 2003 at 19:46:05 from (204.180.62.194):

In Reply to: Super C stopped moving!! posted by shrps74 on October 04, 2003 at 05:51:40:

I had a similar thing happen a few years ago with
my "C". It turned out the be a cast aluminum sling oiler gear on the PTO shaft that had broken and a piece had lodged in the transmission gears. We just took out the pieces and the rest of the gear and it was fine. My mechanic buddy said that gear was only there to lube if the tractor was standing (not moving) for a long time like a belt driven thresher power unit or something and was not needed if you were doing regular tractor stuff that involved ground travel and the transmission turning.

Anyway, it was really easy to remove the top of the transmission and get at it. We also cleaned out the tranny case with hot kerosene and when we were done the original paint was still on the inside of the transmission and the gears were just beautiful pieces of machining.

Hope your problem is as easy.

Follow Ups:

• Re: Re: Super C stopped moving!! shrps74 20:30:30 10/05/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Super C stopped moving!! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]