Re: Need your opinons on my (a) restoration Im wor

Posted by CNKS on October 04, 2003 at 19:28:15 from (207.178.96.212):

In Reply to: Need your opinons on my (a) restoration Im working posted by Jonathan Mirgon on October 04, 2003 at 16:22:12:

Cast has to be pretty rough before I will fill it. I have one really deep place on one of my Super H wheel weights, it's too big to fill, and would definitely looked repaired. If I can't stand it I have an extra set of weights on another tractor. I did fill a relatively small hole on one of the front wheels, used JB weld, as bondo will crack or fall out on something that deep. As I said, the repaired places will still show, since you can't duplicate the appearance of the cast, particularly after they are painted. I would concentrate on the sheet metal, and perhaps some of the other metal parts that may be a little rough. It "may" be possible to smooth out the cast by knocking the tops off the peaks by sanding, then several coats of sanded primer surfacer. However in my opinion, for orginality cast should look like cast.

Follow Ups:

• Re: Re: Need your opinons on my (a) restoration Im Dave Repinski 23:44:14 10/06/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Need your opinons on my (a) restoration Im wor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]