Re: H that keeps running after it is shut off

Posted by CNKS on September 28, 2003 at 18:06:53 from (207.178.96.211):

In Reply to: H that keeps running after it is shut off posted by Pete H on September 28, 2003 at 15:35:04:

Set the timing at 0 degrees with the engine off and no. 1 at TDC. If you have a mag the point setting is 0.013, distributer is 0.020. Set the float level and main jet to the specs in the book, or you will have other problems. I this doesn't work, then you have carbon as the post below says. Push in the switch and pull the choke rod all the way out. This cuts off the air and the engine will usually die.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H that keeps running after it is shut off Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]