Hydra-touch control valves

Posted by William C. Owens on September 13, 2003 at 14:50:25 from (209.74.58.142):

I have an I/H 300 that has an hydra touch control valve that does not center when you release the handle. The manual says it is probably the control valve centering spring. it shows a diagram of how to disassemble the valve to get at the spring,but I am a little leary about tearing into that valve. Without any more experiance than I have with these things. are there spare parts available for these valves? just in case I break some part inside of it.or can I buy another valve somewhere?Has anyone come up with another way to get the valve to center without taking it apart? I would appreciate any help,or suggestions. Willy Owens.N.E.Penna.

Follow Ups:

• Re: Hydra-touch control valves Tom 11:03:07 09/15/03 (0)
• Re: Hydra-touch control valves Red Rider 19:43:27 09/13/03 (0)
• Re: Hydra-touch control valves Hugh MacKay 17:45:57 09/13/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Hydra-touch control valves Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]