|
Farmall & IHC Tractors Discussion Board |
Re: super c waterpump
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Hugh MacKay on September 02, 2003 at 19:23:58 from (64.228.11.123):
In Reply to: super c waterpump posted by Ken Griffin on September 02, 2003 at 18:01:25:
Ken: My Farmall 130 water pump went awhile back, I bought a kit. I wound up taking the pump to a shop to be installed. When I was all done I was quoted a price on a rebuilt pump exchange which was actually couple dollars less from CaseIH. That 130 pump is same as yours. Pump went this spring on my 140, that one is slightly different, more like an automotive job, mounts on the fan shaft, actually is the fan shaft. CaseIH didn't have a rebuilt in stock, so sent it off to rebuilders, through an auto parts store. That turned out to be substancially less money than either of the other two options. My prices in Canadian dollars 130 pump Kit $131. plus $25. at shop total $156., 130 rebuilt pump $150. and 140 rebuild $80. So it wouldn't hurt to do a bit of shopping. I was quoted $100. by another firm on 140 rebuild.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Measuring with Calipers - by Staff. The legs of inside calipers are curved outward at the extremities to facilitate measuring small holes, while outside caliper legs have a large curve inward to increase their capacity for large work. Firm-joint calipers are adjusted approximately by the hands and then set to the feel of the work by tapping them on a metal surface. It is a common practice when opening calipers by this means to tap the top of the joint. It is better, if possible, to tap the inside of the legs, as repeated blo
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|