Re: IH 1066 HYDRAULIC PROBLEM..

Posted by Chip on August 26, 2003 at 15:22:49 from (66.72.62.47):

In Reply to: IH 1066 HYDRAULIC PROBLEM.. posted by MITCHELL DABBS on August 26, 2003 at 13:03:40:

If its high hour/heavy pto use most likely the clutch hub/input shaft. That runs agear &shaft that runs hyd &pto. Probably cant see it to well from clutch insp hole. Take top link mtg off,look in at shaft running front to back. It should turn in relation to engine speed.If thats it split tractor.FYI; IT manual (&IH) pictures are not quite right,& there is 2 different shafts (pitch)at least on 966. expect some gear whine w/ new gear on old.Real bad whine/scream wrong gear. Been there,done that,start over.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IH 1066 HYDRAULIC PROBLEM.. Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]