Re: H rear axle

Posted by Hugh MacKay on August 10, 2003 at 02:48:03 from (216.208.58.137):

In Reply to: H rear axle posted by H-Man on August 09, 2003 at 20:19:05:

H Man: If these are same or similar to the 300, yes you can rmove pto and go from there. However what you are removing is a large bolt from inner end of axle. That bolt along with a large washer hold the bull gear on axle which is splined. If I remember correctly the bull gear will not slide off but rather you pull the axle and carrier from the bull gear. About 3" and it will be completely out anyhow. I think in trying that I would put a jack stand under end of axle. I changed an axle in a 300 and I remember the most difficult part of process was getting axle back into bull gear.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: H rear axle Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]