Re: How do you get rust out of the carb

Posted by jal-SD on August 07, 2003 at 07:24:42 from (12.17.66.110):

In Reply to: How do you get rust out of the carb posted by Frank on August 06, 2003 at 16:16:33:

Frank, go over to the Case Board archives, about page 5 or so under the "author" section & look for "Electrolysis - Have you tried it" written by Baggsy-Wy. He's got a link to the Arm & Hammer page that tells you how to set up an electrolysis process that will remove rust. (There are several artilcles there that discuss this, most by Baggsy. Look at them, too.) I was a "skeptic" so I had to try it. YOU WON'T BELIEVE HOW WELL IT WORKS! I cleaned up a carb that was a solid mass of rust using this method. I also cleaned up an 8" Cresent wrench that was so rusty you couldn't read the letters on the handle, it works great now! (My $0.02 worth. jal-SD)

Follow Ups:

• Re: Re: How do you get rust out of the carb rustyfarmall 08:13:38 08/07/03 (1)
  • Re: Re: Re: How do you get rust out of the carb jal-SD 14:11:18 08/07/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: How do you get rust out of the carb Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]