Missing 350U head+

Posted by Slowpoke on August 07, 2003 at 01:14:53 from (67.30.99.163):

I bought a 350U (SR# 8585) with a missing head and push rods. On the upper rear right side of the block is C-175. All the suppliers want a casting number off the head, but there's no head, so I can't give them a number. Can anyone provide a casting #? Some say that a 300 head will fit, but the bore on the 300 is 3-9/16, 169cu. in., while the bore on the 350 is 3-5/8. No one has mentioned using a Farmall 350 head. Which head and push rods will be a correct replacement? There must be very few 350U tractors around, at least in Northern California.
Thanks for any assistance.
BTW, are the 350U serial numbers continous from '57 thru '58? It looks like they made 1462 in '56 and nearly 13,000 in '57, since the beginning # in '58 is 15049.

Follow Ups:

• Re: Missing 350U head+ dick 06:48:43 08/07/03 (1)
  • Re: Re: Missing 350U head+ Slowpoke 00:11:26 08/12/03 (0)
• Re: Missing 350U head+ Van 05:20:24 08/07/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Missing 350U head+ Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]