|
Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Re: Re: Re: fuel injecters on IH/MD
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Super Dave on August 03, 2003 at 19:27:28 from (67.50.237.57):
In Reply to: Re: Re: Re: Re: Re: fuel injecters on IH/MD posted by Farmaller on August 03, 2003 at 18:52:26:
Farmaller:Thank you for taking time to help me out I did try a couple things you wrote to me. Like I Took off the valve cover to make sure that the starting valves were not stuck (and they were not) and I asked another guy (chuck's repair) if 61 psi was enough and he said yes that it was plenty of pressure. But one thing I didn't try was cleaning them I did on the other hand take one out completely and hook it on to it's fuel advanced the throtle and started it on gas and let it warm up and try to convert it over and at no point do put fuel out (except a few LITTLE drops. I do wounder if all the injectors are dirty and do you know how to clean them If so your help is very much apprecatied. Thanks Super Dave
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Converting from 6 Volt to 12 Volt - by Chris Pratt. It's a common problem for old machines especially when the weather starts to dip below 40 and the tractor isn't fired up as often. You are probably used to the 12 volt Diehard, charged with 200 amp alternator of your 3/4 ton that always is ready and always starts. It's this type of experience that brings about the many queries we get for 12-volt conversion kits. Since only a few kits are available (we sell kits for the
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
