Re: Super A belt drive question

Posted by Haas on July 18, 2003 at 18:33:14 from (12.65.42.195):

In Reply to: Super A belt drive question posted by Randy Redd on July 18, 2003 at 16:52:48:

I guess you are talking about the belt pulley unit only, not the PTO. Then you would be talking about the belt pulley bevel gears. The parts book for the A and B shows two different part numbers for the drive pinion bevel gear and the belt pulley shaft. Early tractors had part number 43631D for the pinion drive gear. Later tractors had 351626 R1 for the pinion drive gear. For the Super A, you would need the later parts.

Follow Ups:

• Re: Re: Super A belt drive question Gary-Miss 20:43:04 07/18/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Super A belt drive question Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]