Re: Sleeves in a C113 engine block

Posted by Gary_N_WV on July 15, 2003 at 18:53:26 from (69.43.24.178):

In Reply to: Sleeves in a C113 engine block posted by David Bean on July 15, 2003 at 09:42:45:

David,
I found one of the posts that I had read......and if I can get the link to it, you can read it and the replys yourself.
Although they are talking about an "A", I think the engine casting is the same as yours.

As I said in my previous post,I'm new to farmall and was hoping you would get more opinions than mine and one other.

If it were me, I'd do some more checking before I let the machine shop do any boring on your block.

G'day mate!

• http://www.ytmag.com//farmall/messages/135131.html

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Sleeves in a C113 engine block Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]