Re: 560/330/M's

Posted by Andy Martin on July 13, 2003 at 15:24:05 from (12.86.235.213):

In Reply to: 560/330/M's posted by Bob Newhouse on July 13, 2003 at 08:00:12:

I assume you mean a neoprene-tipped float valve seat.

Bent floats are a major cause of needles sticking. I don't think I've ever identified a soft-tipped needle as the problem. If one of the floats is too close to the reservoir wall it will hang up until you bang on the carburetor.

They can be a bear to get straight.

Also, the float should move freely on the shaft with the needle in place. I have had a rough spot on the top of the float hang up on the needle.

Follow Ups:

• Re: Re: 560/330/M's Bob 21:19:50 07/14/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: 560/330/M's Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]