|
Farmall & IHC Tractors Discussion Board |
Re: Best Primer and Paint
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by CNKS on July 10, 2003 at 19:46:31 from (207.178.96.211):
In Reply to: Best Primer and Paint posted by Tim on July 10, 2003 at 19:32:56:
You said best -- PPG or DuPont acrylic urethane. Requires supplied air respirator (about $500) to keep you alive. One step down: PPG or Dupont acrylic enamel without hardener (twin cartridge respirator) over epoxy primer and hardener (PPG's does not contain iso's), and primer surfacer on the sheet metal (cast gets epoxy only). Another step down: Case-IH 2150 and their primer (but I would still recommend epoxy primer). That is the minimum satisfactory paint. Don't use paint from TSC or other farm stores, as it is not high quality. For more details (and there are lots of them) check the archives on the painting forum.
Follow Ups:
Home
| Forums
| Order Support
Today's Featured Article -
Horsepower Defined - by Staff. Indicated Horsepower This represents the power developed in the enine cylinder as obtained from the pressure in the cylinders. This is pressure obtained from an indicator which shows cylinder pressures. Indicated horsepower does not represent the actual useful power delivered by the engine. Brake Horsepower This is the actual horse power delivered by the engine to the shaft. It is equal to the "indicated horsepower" less the friction of the engine. It is useful hor
... [Read Article]
Latest Ad:
Late 50s early 60s international harvester 560 with cultivator
[More Ads]
Copyright © 1997-2026 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|
