Re: Farmall H not running right?

Posted by CNKS on July 08, 2003 at 19:24:39 from (207.178.96.212):

In Reply to: Farmall H not running right? posted by John on July 08, 2003 at 14:32:54:

Bottom screw is main jet, idle mixture screw is at top front of carb -- both are adjusted the same way, with the engine hot. Turn in until rough, out until smooth. Main jet at full throttle, idle jet (self explanatory) at idle. Set the idle rpm with the throttle stop screw, above the idle mixture screw. The main jet and the idle mixture both have to be adjusted correctly to get rid of the hesitation. May take 2 or 3 tries. Otherwise you need to clean the carb and/or you may have an ignition problem. Remember that turning the main jet screw in LEANS the mixture, whereas turning the idle jet screw in RICHENS the mixture.

Follow Ups:

• Re: Re: Farmall H not running right? farmall h 19:43:19 07/08/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: Farmall H not running right? Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]