worn out governor

Posted by rustyfarmall on July 07, 2003 at 18:31:04 from (216.248.75.160):

Has anyone found, or know of, a good way to get a good, snug fit between the governor weights and the pins that hold them in place? I know that new pins will take care of part of the problem, but the holes in the weights seem to be worn also, I know I don't want it too tight, or it won't function properly either. I am talking about the units on an H or M.
I am hoping that someone on this board of great knowledge has found a good poor-mans approach to fixing this problem.

Follow Ups:

• Re: worn out governor We have one of those here 00:11:13 07/09/03 (0)
• Re: worn out governor Hermit 18:56:17 07/07/03 (0)

Post A Followup Name: E-Mail: Subject: Re: worn out governor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]