Re: F20 narrow vs widetread tractor

Posted by Harold H on July 04, 2003 at 07:13:05 from (64.12.97.13):

In Reply to: F20 narrow vs widetread tractor posted by Mark on July 03, 2003 at 21:13:08:

On the Regular-Tread F-20 with standard wheels the rear tread was 74 3/8" wheels in regular position or 83 1/2" with wheels reversed. The Narrow-Tread F-20 rear tread was 62 5/8" with in regular position turned in or 71 3/4" with wheels reversed. Other than the approximately twelve inch narrower rear end, (each axle housing was about 6" shorter) the rest of the tractor was basicly the same. Many different and special rear wheels were available on the F-20. With various different wheels available for the Regular-Tread F-20 minimum tread width ranged from 68" to a maximum of 95". Different wheels available on the Narrow-Tread F-20 had a range of 51" to 83".

Harold H

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: F20 narrow vs widetread tractor Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]