Re: farmall 806 stuck in low range

Posted by Mark B on June 20, 2003 at 06:14:04 from (209.152.65.66):

In Reply to: farmall 806 stuck in low range posted by Bernie Finch on June 20, 2003 at 06:02:57:

Down under your feet on the right side you will notice your linkage. Put your transmission in neutral and take a screwdriver and line up the slots on the linkage. This should allow you to return to normal, but you may need to work on your linkage so it wont happen again, I'd say shes getting a little loose. Hope this helps, Mark

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: farmall 806 stuck in low range Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]