Re: H rear pto seal

Posted by Haas on June 03, 2003 at 04:59:09 from (12.65.24.230):

In Reply to: H rear pto seal posted by jmyt_47 on June 02, 2003 at 22:01:44:

The new seals are vastly improved over the old ones. You should not have a problem as long as the shaft surface is in good condition. With the new seal, you can press it in to a location where the shaft is good. There was no such thing as Viton in 1950. That is why they had to use multiple seal systems, and most of the old seals were leather, nowhere near as good as the new materials.

Follow Ups:

• Re: Re: H rear pto seal scotty 09:41:16 06/03/03 (0)

Post A Followup Name: E-Mail: Subject: Re: Re: H rear pto seal Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]