Re: shimming belt pulley pto on an (A)

Posted by Roger on May 31, 2003 at 19:40:17 from (198.31.223.151):

In Reply to: shimming belt pulley pto on an (A) posted by JONATHAN MIRGON on May 31, 2003 at 15:04:34:

Jonathan, No matter how you do the shimming, it is a pain. I used a black marker to paint the teeth on one of the bevel gears. Then assembled the unit with some shims in place. Then turn the belt pulley several revolutions restraining with your hand the pto shaft. Then disassemble and see where the gears are meshing. If they are not meshing correctly in the heal of the bevel gear then you need to add or subtract shims. It will probably take several attempts to get it correctly shimmed. Roger

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: shimming belt pulley pto on an (A) Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]