Re: ih 240-clutch replaced still grinding...

Posted by Dan in Texas on May 28, 2003 at 16:05:15 from (66.230.21.222):

In Reply to: ih 240-clutch replaced still grinding... posted by dean on May 28, 2003 at 04:49:38:

Ya'll beat me to it. I was thinking clutch plate in backwards and problem with the pilot bushing too. I'll bet one of them is it.
For anyone else reading this don't EVER replace a clutch and not do the pilot. I got my super c real real cheap after the original owner replaced the clutch disk pressure plate flywheel and throwout on it and it still wouldn't work. The pilot was worn out. It cost me 4 dollars to fix and boy was he mad.
Also I use 85-140 in the rear. It stops the gears from spinning real quick. With the temps I have been operating in I am sure it helps too but I have used the tractor at temps down to 20 below in pennsylvania and no problems there either.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: ih 240-clutch replaced still grinding... Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]