Re: Cub Help!!

Posted by Bigdog on May 25, 2003 at 12:21:44 from (157.254.98.201):

In Reply to: Cub Help!! posted by Chris P on May 25, 2003 at 12:05:37:

Pull the inspection plate off the bottom of the torque tube. With a flashlight, you may be able to see what is going on. Clutch pedal should have 1" of free play. Sounds like the throw-out bearing is getting worn and may need to be replaced. The cub uses a graphite block bearing, but there are standard bearing replacements now available from Bates Corp. and other places. If you stay with the graphite bearing, get one from IH, not one of the after-market ones - they don't seem to last very long.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Cub Help!! Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]