Re: 6 to 12 volts with magneto and 10si alt

Posted by Doug in OR on May 21, 2003 at 05:56:40 from (12.225.51.197):

In Reply to: 6 to 12 volts with magneto and 10si alt posted by KEV on May 20, 2003 at 19:30:52:

For test purposes, temporarily tie all 3 alternator connections together. Be sure the alternator is connected to the battery. With the engine running, you should have about 14 volts at the BAT stud on the alternator. If you don't, try speeding the engine way up. If you still don't have voltage, check your pulley diameter on the alternator. You want as small a pulley as possible on the alternator - 2 inches or less, if possible.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 6 to 12 volts with magneto and 10si alt Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]