300 Throttle help

Posted by Ohio H on May 18, 2003 at 12:46:24 from (65.172.225.39):

Please help. Working on grandfathers 300, and have no throttle response from the 12o'clock(low idle) position untill about the 2o'clock position. Atlow idle the connecting arm in front of the fuel tank on the upper throttle rod is in a straight down position. Moving the hand lever to the 2o'clock position only produces a slight side to side motion instead of up or down. Could the upper throttle shaft have been rotated 180 degrees in the throttle hand lever? All governor and lower throttle linkage seems to be working properly. We have been at our wits end over this for many years now. Any input is greatly appreciated, Thanks.......H

Follow Ups:

• Re: 300 Throttle help Ohio H 21:07:05 05/18/03 (0)
• Re: 300 Throttle help Hugh MacKay 18:11:16 05/18/03 (0)
• Re: 300 Throttle help scotc 16:30:20 05/18/03 (0)
• Re: 300 Throttle help here, try this 14:24:22 05/18/03 (1)
  • Re: Re: 300 Throttle help steveormary 20:37:04 05/18/03 (0)

Post A Followup Name: E-Mail: Subject: Re: 300 Throttle help Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]