Re: Re: Re: Year of H with no serial number tag

Posted by F20II on May 09, 2003 at 10:17:14 from (208.187.14.179):

In Reply to: Re: Re: Year of H with no serial number tag posted by Charlie on May 09, 2003 at 08:56:23:

Casting code are the larger numbers on the cast wheels, the transmission/rear end of the tractor, they will be stamped in an are very clear most times. You can also look at the front of the engine (right side) just below the head and above the dist or mag, there should be a flat machined spot the about 4/5 inches long an an inch wide with a number stamped on it. This in alot of case's is the serial number of the tractor unless the engine has been changed an then there may not be a number at all or in the case of Super H's different en gine's were put on tractors at time with different serial numbers than the tractors. hope this helps :o)

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Re: Re: Year of H with no serial number tag Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]