Re: 1206 TA Adjustment

Posted by Aces on May 06, 2003 at 15:38:58 from (205.186.122.68):

In Reply to: 1206 TA Adjustment posted by jarrod on May 06, 2003 at 09:57:47:

If it is a farmall. first make sure main clutch has the right free play, about 3/4 inch from deck the little dump valve out the back of MCV should make contect with main clutch at this time just make sure that when main clutch is all the way down pump valve is all the way out but not tight. the TA valve should set on the snap ring when lever is forward and all the way up when in TA but tight in the link under the hood is a forward and back for lever. I would use the TA but when you shaft, shaft like you meen it that is why it has an over senter lever warm up thactor first if that meens making a round or 2 in lower gear in cold weather don't use it in TA.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: 1206 TA Adjustment Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]