Re: Draining 504

Posted by Ben in KY on May 02, 2003 at 11:53:35 from (192.76.82.89):

In Reply to: Draining 504 posted by Jimmy on May 02, 2003 at 09:45:49:

Jimmy is there another one on the right rear of the lift/jackshaft housing ? Not sure if yours is like mine or not. I have a 2444/444. On mine you pull all three in the bottom and the one on the jackshaft housing.
My hyrraulic fluid actually returns to the jackshaft case and overflows thru a standpipe down to the tranny/rearend case ( all connected internally ).
The manual just spoke of the 3 in the bottom, but I figured out how it worked and decided to get rid of the 3-4 gallons of old fluid in the jackshaft housing I would have to pull that drain too. Then fill up the jackshaft housing first and then the tranny/rearend.

Hope this makes sense and applies to yours.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: Draining 504 Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]