Re: IHC 400 Torque

Posted by Red Rider on April 20, 2003 at 19:21:19 from (66.248.104.83):

In Reply to: IHC 400 Torque posted by adam on April 20, 2003 at 17:51:07:

Adam, usally when the TA goes out it is the overrun clutch (ramp and roller assembly). Your TA clutch could be slipping but that is usally not the case. I have replaced the ramp and roller assembly on all three of my tractors to the heavy duty sprague overrun clutch. You can have your present TA rebuild with the sprague unit by Richard M. Bednarski, 215 Buffalo Rd So., Washington, Pa 15301. Phone # 724 345-3546 or 800 832-6350 in the evenings. I replaced both main and TA clutch, pressure plate, throw out bearigs all seals and gaskets plus had Richard rebuild the TA with Sprague overrun clutch for $892.00 Once you split your tractor you usually don't want to have to do it again.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: IHC 400 Torque Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]